Products List
UNIVERSAL 4790 SMTpart
.
By Event Text: sorts in alphabetical order by the event message text.
.
By Light Status: sorts in order of the light color selected. For example if red is selected, all events that activate the red lamp are listed first, then all events which deactivate the red lamp are listed.
.
By Audible Alarm Status: sorts in order of...
UNIVERSAL 4785 HSP SMTpart
3
To send the event configuration to a file, select the Print to File checkbox (checkmark visible).
Printing the event configuration to a file allows the file to be printed at a different system or viewed using a text editor. However, the file cannot be modified using the text editor and then imported back to a machine.
To send the event...
UNIVERSAL GSM1 SMTpart
15. Apply Magnalube to the pin and the contact surfaces of the arm and
clevis. Orient the clevis so the angled cut out faces the shaft.
16. Insert the arm through the clevis. Install the pin and secure the pin in
position using the E-clips. Orient the pin as shown then tighten the
screws securing the cap and arm to the index shaft.
Head...
UNIVERSAL GSM2 SMTpart
Page 37
VCD Insertion Head Assembly (5mmTooling) T46899403 Rev. R
TECHNICAL PUBLICATIONS
This Document Supports Assembly 46899403 Rev. M
10. Slide the index shaft in the housing from the left side with the flat on
the shaft projecting from the right side. Slide on a collar clamp, the
right arm, the left arm and another collar clamp....
UNIVERSAL GSMX SMTpart
6. Place the key into the keyway on the shaft then slide the pinion over
the key. An R is embossed on one end of the pinion. This end should
face the right side of the housing. Slide another locking element onto
the shaft, noting the orientation. Slide another lock nut into position on
the shaft.
7. Continue to slide the assembled shaft...
UNIVERSAL GSMX SMTpart
6. Place the key into the keyway on the shaft then slide the pinion over
the key. An R is embossed on one end of the pinion. This end should
face the right side of the housing. Slide another locking element onto
the shaft, noting the orientation. Slide another lock nut into position on
the shaft.
7. Continue to slide the assembled shaft...
Mydata SMT Part
Description
The HYDRA Speedmount is an eight-nozzle mounthead for high-speed mounting of a wide range of components. It is available
Options -MY-Series
Feeder System
Whether you're looking for tape, stick or matrix tray feeders, MYDATA's feeders are designed to provide the utmost in reliability, performance and easy operation. And they...
PCB Printer Part
3
4
5
Electrical Drawings
155532 Issue 3 Breakout PCB E (Print Carriage)
A
B
C
D
E
F
G
H
I
8 10 11 139 12 A
B
CESK2
01 +12V USR 02 PROFLOW FITTED 03 0V USR 04 +12V USR 05 PROFLOW CASSETTE LOW 06 0V USR
ESK3 01 +12V USR 02 CARTRIDGE VERTICAL 03 0V USR 04 +12V USR
D
05 CARTRIDGE HORIZONTAL...
PANASONIC AI Part
N017 N510018754AA .......... FLUSH HEAD TAPPING SCREW 14 4X16 A2S (Trivarent)
N018 N510017941AA .......... BINDING HEAD SCREW 2 M4X10-4.8 A2J (Trivale
N019 N510017947AA .......... BINDING HEAD SCREW 2 M4X8-4.8 A2J (Trivalen
N020 N510018744AA ............. PAN HEAD TAPPING SCREW 5 4X10 A2S (Trivalent)
N025 ...
UNIVERSAL AI Part
problems occur.
The component index speed can be checked by accessing the Rapid Motion
Timing Dialog in the IM Diagnostics software as follows.
Adjustment Procedure:
1. Push the STOP push button.
2. Palm the machine down as detailed in the Operation Manual.
3. Activate the IM Diagnostics as follows. Refer to the IM-UPS and IM...